Clear Ip Arp Inspection Log; This Command Has No Arguments Or Keywords - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

clear ip arp inspection log

To clear the status of the log buffer, use the clear ip arp inspection log command.
Syntax Description

This command has no arguments or keywords.

Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(19)EW
Examples
This example shows how to clear the contents of the log buffer:
Switch# clear ip arp inspection log
Switch#
Related Commands Command
arp access-list
show ip arp inspection log
OL-25342 -01
clear ip arp inspection log
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
Description
Defines an ARP access list or adds clauses at the end of a
predefined list.
Displays the status of the log buffer.
clear ip arp inspection log
2-105