Cisco Catalyst 4500 Series Command Reference Manual page 113

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
For interfaces with auto qos voip cisco-phone enabled
—Global Level Commands Generated
The global templates defined in A and B (above).
—Interface Level Commands Generated
For Fa/Gig Ports:
Switch(config-if)# no qos trust device cisco-phone
Examples To generate QoS configurations based on solution reference network design 4.0, do the following:
Switch# auto qos srnd4
Related Commands Command
auto qos trust
auto qos voip cisco-softphone
OL-25342 -01
service-policy input AutoQos-4.0-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
no service-policy input AutoQos-VoIP-Input-Cos-Policy
no service-policy output AutoQos-VoIP-Output-Policy
qos trust device cisco-phone
service-policy input AutoQos-4.0-Cisco-Phone-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
Description
Generate QoS configurations for trusted interfaces.
Generate QoS configuration for interfaces connected to PCs
running the Cisco IP SoftPhone application and marks police
traffic coming from such interfaces.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
auto qos srnd4
2-55