Dot1X Re-Authenticate - Cisco Catalyst 4500 Series Command Reference Manual

dot1x re-authenticate

dot1x re-authenticate
To manually initiate a reauthentication of all 802.1X-enabled ports or the specified 802.1X-enabled port,
use the dot1x re-authenticate command.
Syntax Description
interface interface-id
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(12c)EW
Usage Guidelines
You can use this command to reauthenticate a client without waiting for the configured number of
seconds between reauthentication attempts (re-authperiod) and automatic reauthentication.
Examples
This example shows how to manually reauthenticate the device connected to Gigabit Ethernet
interface 1/1:
Switch# dot1x re-authenticate interface gigabitethernet1/1
Starting reauthentication on gigabitethernet1/1
Switch#
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
2-216
dot1x re-authenticate [interface interface-id]
(Optional) Module and port number of the interface.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
OL-25342 -01