Show Ipif; Show Switch; Config Account Admin Password - D-Link DES-1228 Manual

6 Command Line Interface
Syntax
reset config
Example
DES-1228> reset config
% Device will reboot after reset configuration successfully.
DES-1228>

Show ipif

The command displays the current IP address of the switch.
Syntax
show ipif
Example
DES-1228> show ipif
IP Setting Mode
IP Address
Subnet Mask
Default Gateway
DES-1228>

Show switch

The command displays the status of the switch.
Syntax
show switch
Example
DES-1228> show switch
System name
System Contact
System Location
System up time
System Time
System hardware version
System firmware version
System boot version
System Protocol version
System serial number
MAC Address
DES-1228>

Config account admin password

The command sets the administrator password.
Syntax
config account admin password <passwd>
Parameter
Parameter
<passwd>
Figure 96 – The reset config command
: Static
: 172.17.5.214
: 255.255.255.0
: 172.17.5.254
Figure 97 – The show ipif command
:
:
:
: 0 days, 6 hrs, 32 min, 17 secs
: 01/01/2009 06:32:19
: C1
: 2.00.000
: 1.00.003
: 2.001.004
: 1MB1733K0000A
: 00-18-E7-48-85-50
Figure 98 – The show switch command
Description
The new password of the administrator.
5 5 9 9
D-Link Web Smart Switch User Manual