Configure Vlan Add Domain-Member Vlan - Extreme Networks ExtremeWare Command Reference Manual

ESRP Commands

configure vlan add domain-member vlan

configure vlan <super_esrp_vlan> add domain-member vlan <sub_esrp_vlan>
Description
Adds a VLAN to an ESRP domain.
Syntax Description
super_esrp_vlan
sub_esrp_vlan
Default
N/A.
Usage Guidelines
ESRP is performed in the domain master VLAN only, and not the other domain members. The domain
master VLAN controls member VLANs whether they are in forward or blocked states.
The domain master does not need to have all the ports as the domain members. Domain master VLANs
can have their own set of ports and the members can have different ports.
Example
The following command adds the domain member-VLAN sub_esrp1 to ESRP-enabled domain
master-VLAN esrp-super:
configure vlan esrp-super add domain-member vlan sub_esrp1
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
1066
Specifies the name of an ESRP-enabled domain master-VLAN.
Specifies the name of a domain member-VLAN.
ExtremeWare Software 7.3.0 Command Reference Guide