Configure Bgp Peer-Group Route-Map-Filter - Extreme Networks ExtremeWare Command Reference Manual

configure bgp peer-group route-map-filter

configure bgp peer-group <peer group> route-map-filter [in | out] [none |
<routemap>
Description
Configures the route maps for a peer group and all the neighbors of the peer group.
Syntax Description
peer group
in
out
none
route map
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the route map filter for the peer group outer and its neighbors using
the access profile nosales:
configure bgp peer-group outer route-map-filter in nosales
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a peer group.
Specifies to install the filter on the input side.
Specifies to install the filter on the output side.
Specifies to remove the filter.
Specifies a route map.
configure bgp peer-group route-map-filter
1439