Configure Auth Netlogin Tacacs-Accounting - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

configure auth netlogin tacacs-accounting

configure auth netlogin tacacs-accounting primary

<ipaddress>]

Configure the use of TACACS accounting servers for netlogin session accounting.

Syntax Description

Usage Guidelines

The TACACS accounting servers should be configured before this command. This command returns an

error if the given primary and secondary TACACS servers are not configured or if TACACS

authentication is not configured for netlogin sessions.

configure auth netlogin tacacs primary 192.168.14.12 secondary 192.168.14.55

This command was first available in ExtremeWare 7.3.

Platform Availability

This command is available on all platforms.

Specifies the IP addresses of the primary and secondary servers.

<ipaddress> [secondary

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0