IGP Commands
configure isis lsp refresh interval
configure isis lsp-refresh-interval <seconds>
Description
Configures the LSP refresh interval.
Syntax Description
seconds
Specifies the LSP refresh interval in seconds.
Default
900 seconds.
Usage Guidelines
You can only use this command when IS-IS is disabled.
The LSP refresh interval range is from 100 to 65,235 seconds.
Example
The following command configures the LSP refresh interval:
configure isis lsp-refresh-interval 120
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
1272
ExtremeWare Software 7.3.0 Command Reference Guide