Configure Isis Vlan Cost - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure isis vlan cost

configure isis [vlan <vlan name> | all] [level-1| level-2 | level-1-2] cost
<cost>
Description
Configures the IS-IS metric for the different IS-IS levels of a routing interface.
Syntax Description
vlan name
all
level-1
level-2
level-1-2
cost
Default
The default cost value is 10.
Usage Guidelines
Extreme Networks recommends that you configure metrics on all interfaces. If you do not, the IS-IS
metrics are similar to hop-count metrics.
If is specified, the metric is applied to all the routing interfaces in the system.
all
The range of is 0 to 16,777,215, where 16,777,215 is the maximum value allowed with wide metrics.
cost
If is greater than 63, a value of 63 is advertised as the regular metric of the interface. The default is
cost
10.
The , , and
level-1 level-2
Example
The following command configures the level 1 vlan v1 cost as 25:
configure isis vlan v1 level-1 cost 25
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
1278
Specifies the name of a VLAN.
Specifies all VLANs.
Specifies IS-IS level 1.
Specifies IS-IS level 2.
Specifies IS-IS level 1 and level 2.
Specifies the cost value.
options specify the levels to which the metric is applied.
level-1-2
ExtremeWare Software 7.3.0 Command Reference Guide