Extreme Networks ExtremeWare Command Reference Manual page 628

Commands for Status Monitoring and Statistics
To see the current configuration of a filter, use the following command:
show log configuration filter <filter name>
Example
To change the severity level of the filter item added with this command:
configure log filter bgpFilter2 add events bgp.keepalive severity notice
use the following command:
configure log filter bgpFilter2 set severity info events bgp.keepalive
History
This command was first available in ExtremeWare 7.1.0
Platform Availability
This command is available on all platforms.
628 ExtremeWare Software 7.3.0 Command Reference Guide