Configure Auth Netlogin Radius-Accounting - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

configure auth netlogin radius-accounting

configure auth netlogin radius-accounting primary

<ipaddress>]

Configure the use of RADIUS accounting servers for netlogin session accounting.

Syntax Description

Usage Guidelines

The RADIUS accounting servers should be configured before this command. This command returns an

error if the given primary and secondary RADIUS servers are not configured or if RADIUS

authentication is not configured for netlogin sessions.

configure auth netlogin radius-accounting primary 192.168.14.12 secondary

192.168.14.55

This command was first available in ExtremeWare 7.3.

Platform Availability

This command is available on all platforms.

Specifies the IP addresses of the primary and secondary servers.

<ipaddress> [secondary

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0