Configure Isis Delete Area-Address - Extreme Networks ExtremeWare Command Reference Manual

configure isis delete area-address

configure isis [level-2 | area <isis area identifier>] delete <area
address>
Description
Deletes an IS-IS area address for a level 2 subdomain or a level 1 area.
Syntax Description
isis area identifier
area address
Default
N/A.
Usage Guidelines
At least one area address must be configured per area or subdomain, up to a maximum of three.
Configuring multiple area addresses can be temporarily useful when multiple areas are merged, or
when one area is split into multiple areas. Multiple area addresses enable you to remember an area
individually as needed.
If no area address is configured, the IS-IS process will not start.
Example
The following command deletes an IS-IS area address 00.0001 for the level 2 subdomain:
configure isis level-2 delete 00.0001
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the area identifier.
Specifies the area address.
configure isis delete area-address
1267