Configure Isis Area Delete Domain-Summary - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure isis area delete domain-summary

configure isis area <isis area identifier> delete domain-summary
<ip address> /<netmask>
Description
Deletes a summary address to be applied on the IP reachability information from this level 1 area,
which will be included in the level 2 LSP.
Syntax Description
isis area identifier
ip address
netmask
Default
N/A.
Usage Guidelines
When the summary address is deleted, the summarized IP reachability information must not be
included in the level 2 LSP
Example
The following command deletes one summary address 10.0.0.0/8 from the level 1 area a1:
configure isis area a1 delete domain-summary 10.0.0.0/8
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
1264
Specifies an area identifier.
Specifies an IP address.
Specifies an IP mask
ExtremeWare Software 7.3.0 Command Reference Guide