Disable Isis Ignore-Attached-Bit - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IGP Commands

disable isis ignore-attached-bit

Disables ignoring the attached bit.

Syntax Description

This command has no arguments or variables.

The default setting is disabled.

Usage Guidelines

This command can only be applied to a level 1 only switch. It specifies that the level 1 only switch will

not ignore the attached bit (ATT bit) from level 1/2 switches.

This command has the effect of enabling the feature described in the ExtremeWare Software User Guide,

Software Version 7.0.0, in the chapter, "Interior Gateway Protocols", in the section, "Default Routes to

Nearest Level 1/2 Switch for Level 1 Only Switches". See the user guide for more information.

The following command disables ignoring the attached bit:

disable isis ignore-attached-bit

This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently

incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0