IP Unicast Commands
clear iparp
clear iparp {<ip address> | vlan <vlan name>}
Description
Removes dynamic entries in the IP ARP table.
Syntax Description
ip address
vlan name
Default
N/A.
Usage Guidelines
Permanent IP ARP entries are not affected.
Example
The following command removes a dynamically created entry from the IPARP table:
clear iparp 10.1.1.5/24
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1144
Specifies an IP address.
Specifies a VLAN name.
ExtremeWare Software 7.3.0 Command Reference Guide