Enable Rip Triggerupdate - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IGP Commands

enable rip triggerupdate

Enables the trigger update mechanism. Triggered updates are a mechanism for immediately notifying a

router's neighbors when the router adds or deletes routes or changes their metric.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

Triggered updates occur whenever a router changes the metric for a route and it is required to send an

update message immediately, even if it is not yet time for a regular update message to be sent. This will

generally result in faster convergence, but may also result in more RIP-related traffic.

The following command enables the trigger update mechanism:

enable rip triggerupdate

This command was available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0