Configure Vlan Delete Track-Rip - Extreme Networks ExtremeWare Command Reference Manual
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
ESRP Commands
configure vlan delete track-rip
configure vlan <vlan name> delete track-rip
Description
Disables RIP route tracking for an ESRP-enabled VLAN.
Syntax Description
vlan name
Specifies an ESRP-enabled VLAN name.
Default
No RIP route tracking.
Usage Guidelines
None.
Example
The following command disables RIP route failure tracking for VLAN esrp-1:
configure vlan esrp-1 delete track-rip
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
1086
ExtremeWare Software 7.3.0 Command Reference Guide
Advertisement
Table of Contents
