Configure Vlan Esrp Elrp-Premaster-Poll Disable - Extreme Networks ExtremeWare Command Reference Manual

ESRP Commands

configure vlan esrp elrp-premaster-poll disable

configure vlan <vlan name> esrp elrp-premaster-poll disable
Description
Disables the use of ELRP by ESRP in the pre-master state.
Syntax Description
vlan name Specifies an ESRP-enabled VLAN name.
Default
Disabled.
Usage Guidelines
Use this command to disable the use of ELRP by ESRP in the pre-master state. When you disable ELRP
in the pre-master state, the ESRP pre-master switch no longer transmits ELRP PDUs to detect network
loops prior to changing to the master state.
Example
The following command disables the use of ELRP in the pre-master state on the ESRP-enabled VLAN
:
elrp1
configure vlan elrp1 esrp elrp-premaster poll disable
History
This command was first available in ExtremeWare 6.2.2b134.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
1090 ExtremeWare Software 7.3.0 Command Reference Guide