Configure Bgp Add Network - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

configure bgp add network

configure bgp add network <ip address>/<mask length> {<route map>}
Description
Adds a network to be originated from this router.
Syntax Description
ip address
mask length
route map
Default
N/A.
Usage Guidelines
The network must be present in the routing table.
Using the command to redistribute routes complements the redistribution of routes using the
export
configure bgp add network
to BGP only if the route is present in the routing table. The
an individual route from the routing table to BGP. If you use both commands to redistribute routes, the
routes redistributed using the
command.
export
Example
The following command adds a network to be originated from this router:
configure bgp add network 192.1.1.16/12
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
1400
Specifies an IP address.
Specifies a netmask length.
Specifies a route map.
command. The
configure bgp add network
command take precedence over routes redistributed using the
network
command adds the route
command redistributes
enable bgp export
ExtremeWare Software 7.3.0 Command Reference Guide