Configure Isis Area Add Domain-Summary - Extreme Networks ExtremeWare Command Reference Manual

configure isis area add domain-summary

configure isis area <isis area identifier> add domain-summary
<ip address> /<netmask> [advertise {cost <cost(0-4261412864)>} | noadvert]
Description
Adds a summary address to be applied on the IP reachability information from this level 1 area, which
will be included in the level 2 LSP.
Syntax Description
isis area identifier
cost
advertise
noadvert
Default
N/A.
Usage Guidelines
When the
advertise
included in the level 2 LSP. The
Example
The following command adds the domain summary address 10.0.0.0/8 to the level 1 area a1, advertises
the address and sets the cost to 15:
configure isis area a1 add domain-summary 10.0.0.0/8 advertise cost 15
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies an area identifier.
Specifies the cost for the route (0-4,261,412,864).
Specifies that the summarized IP reachability information may be included in
the level 2 LSP.
Specifies that the summary IP reachability information must not be included in
the level 2.
option is configured, the summarized IP reachability information should be
option filters out the summary.
noadvert
configure isis area add domain-summary
1263