Enable Stpd - Extreme Networks ExtremeWare Command Reference Manual

enable stpd

enable stpd
enable stpd {<spanning tree name>}
Description
Enables the STP protocol for one or all STPDs.
Syntax Description
spanning tree name Specifies an STPD name on the switch.
Default
Disabled.
Usage Guidelines
You must create one or more STP domains and configure an STPD before you can use the
enable stpd
command. Use the command to create an STPD.
create stpd <name>
The keyword is optional. You do not need to indicate an STPD name if you
spanning tree name
enable the STP protocol for all STPDs.
Example
The following command enables an STPD named Backbone_st:
enable stpd backbone_st
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 1033