Disable Stpd - Extreme Networks ExtremeWare Command Reference Manual

STP Commands

disable stpd

disable stpd {<spanning tree name>}
Description
Disables the STP protocol on a particular STPD or for all STPDs.
Syntax Description
spanning tree name Specifies an STPD name on the switch.
Default
Disabled.
Usage Guidelines
All VLANs belong to an STPD. If you do not want to run STP on a VLAN, you must add the VLAN to
an STPD that is disabled.
The keyword is optional. You do not need to indicate an STPD name if you
spanning tree name
disable the STP protocol for all STPDs.
Example
The following command disables an STPD named purple_st:
disable stpd purple_st
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1028 ExtremeWare Software 7.3.0 Command Reference Guide