IGP Commands
unconfigure ospf
unconfigure ospf {vlan <vlan name> | area <area identifier>}
Description
Resets one or all OSPF interfaces to the default settings.
Syntax Description
vlan name
area identifier
Default
N/A.
Usage Guidelines
None.
Example
The following command resets the OSPF interface to the default settings on the VLAN accounting:
unconfigure ospf accounting
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
1390
Specifies a VLAN name.
Specifies an OSPF area.
ExtremeWare Software 7.3.0 Command Reference Guide