Configure Iproute Delete Blackhole - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

configure iproute delete blackhole

configure iproute delete blackhole <ip address> <mask>
Description
Deletes a blackhole address from the routing table.
Syntax Description
ip address
mask
Default
N/A.
Usage Guidelines
None.
Example
The following command removes a blackhole address from the routing table:
configure iproute delete blackhole 100.101.145.4
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1168
Specifies an IP address.
Specifies a subnet mask.
ExtremeWare Software 7.3.0 Command Reference Guide