Unconfigure Eaps Port - Extreme Networks ExtremeWare Command Reference Manual

unconfigure eaps port

unconfigure eaps <name> [primary | secondary] port
Description
Sets the specified port's internal configuration state to INVALID.
Syntax Description
name
primary
secondary
Default
N/A.
Usage Guidelines
Unconfiguring an EAPS port sets its internal configuration state to INVALID, which causes the port to
appear in the Idle state with a port status of Unknown when you use the
to display the status information about the port.
Example
The following command unconfigures this node's EAPS primary ring port on the domain eaps_1:
unconfig eaps eaps_1 primary port
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the "i" series platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the name of an EAPS domain.
Specifies that the primary port should be unconfigured.
Specifies that the secondary port should be unconfigured.
unconfigure eaps port
command
show eaps detail
1001