Enable Ip-Option Loose-Source-Route - Extreme Networks ExtremeWare Command Reference Manual
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2620 pages) ,
- Command reference manual (2546 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
enable ip-option loose-source-route
enable ip-option loose-source-route
enable ip-option loose-source-route
Description
Enables the loose source route IP option.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
None.
Example
The following command enables the loose source route IP option:
enable ip-option loose-source-route
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
1225
Advertisement
Table of Contents
