Enable Elrp-Client - Extreme Networks ExtremeWare Command Reference Manual

enable elrp-client

enable elrp-client
enable elrp-client
Description
Enables the Extreme Loop Recovery Protocol (ELRP) client (standalone elrp) globally.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
The ELRP client must be enabled globally in order for it to work on any VLANs.
The ELRP client can be disabled globally so that none of the ELRP VLAN configurations take effect. Use
the command to globally disable the ELRP client.
disable elrp-client
Example
The following command globally enables the ELRP client:
enable elrp-client
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 1107