Configure Isis Vlan Timer - Extreme Networks ExtremeWare Command Reference Manual

configure isis vlan timer

configure isis [vlan <vlan name> | all] [level-1| level-2 | level-1-2]
timer [csnp <seconds>| hellotime <seconds>]
Description
Configures the IS-IS timer interval for the different levels of a routing interface.
Syntax Description
vlan name
all
level-1
level-2
level-1-2
csnp
hellotime
Default
The default for CSNP and Hello timer is 10 seconds.
Usage Guidelines
If is specified, the timer intervals are applied to all the routing interfaces in the system. The
all
command configures both the CSNP and Hello timer values.
The interval is the time in seconds between transmission of CSNPs on multi access networks. This
csnp
interval applies for the designated router. The range is 1 to 3600, and the default is 10.
The
hellotime
The range is 3 to 3600, and the default is 10.
The
level-1
Example
The following command configures the level 1 hellotime interval to 60 seconds for all VLANs
configure isis vlan all level-1 timer hellotime 60
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the name of a VLAN.
Specifies all VLANs.
Specifies IS-IS level 1.
Specifies IS-IS level 2.
Specifies IS-IS level 1 and level 2.
Specifies the time in seconds between CSNP transmissions. Range is 1 to
3600. Default is 10.
Specifies the time in seconds between Hello PDU transmissions. Range is 3
to 3600. Default is 10.
interval is the time in seconds between transmission of Hello PDUS on the interface.
, , and
level-2 level-1-2
options specify the levels to which the timers are applied.
configure isis vlan timer
1281