BGP Commands
disable bgp peer-group
disable bgp peer-group <peer group> {soft-in-reset}
{remove-private-AS-numbers}
Description
Disables a BGP peer group and all the neighbors of the peer group.
Syntax Description
peer group
soft-in-reset
remove-private-AS-numbers
Default
Disabled.
Usage Guidelines
You can use BGP peer groups to group together up to 200 BGP neighbors. All neighbors within the peer
group inherit the parameters of the BGP peer group. The following mandatory parameters are shared
by all neighbors in a peer group:
• remote AS
• source-interface
• out-nlri-filter
• out-aspath-filter
• out-route-map
• send-community
• next-hop-self
Example
The following command disables the BGP peer group outer and all of its neighbors:
disable bgp peer-group outer
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
1460
Specifies a peer group.
Specifies the soft input reset feature.
Specifies to remove private AS numbers.
ExtremeWare Software 7.3.0 Command Reference Guide