STP Commands
unconfigure stpd
unconfigure stpd {<spanning tree name>}
Description
Restores default STP values to a particular STPD or all STPDs.
Syntax Description
spanning tree name
Specifies an STPD name on the switch.
Default
N/A.
Usage Guidelines
Use this command to restore default STP values to a particular STPD. If you want to restore default STP
values on all STPDs, do not specify a spanning tree name.
For version 2.0:
• You can use the
parameter to specify all STPDs.
all
Example
The following command restores default values to an STPD named Backbone_st:
unconfigure stpd backbone_st
History
This command was first available in ExtremeWare 2.0.
Support for the
parameter was discontinued in ExtremeWare 7.0.
all
Platform Availability
This command is available on all platforms.
1042
ExtremeWare Software 7.3.0 Command Reference Guide