Configure Bgp Delete Aggregate-Address - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

BGP Commands

configure bgp delete aggregate-address

configure bgp delete aggregate-address [<ip address/masklength> | all]

Deletes one or all BGP aggregated route.

Syntax Description

ip address/mask length

Usage Guidelines

Route aggregation is the process of combining the characteristics of several routes so that they are

advertised as a single route. Aggregation reduces the amount of information that a BGP speaker must

store and exchange with other BGP speakers. Reducing the information that is stored and exchanged

also reduces the size of the routing table.

The following command deletes a BGP aggregate route:

configure bgp delete aggregate-address 192.1.1.4/30

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all platforms.

Specifies an IP address and netmask length.

Specifies all aggregated routes.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0