Configure Iproute Priority - Extreme Networks ExtremeWare Command Reference Manual

configure iproute priority

configure iproute priority [rip | bootp | icmp | static | ospf-intra |
ospf-inter | ospf-as-external | ospf-extern1 | ospf-extern2] <priority>
Description
Changes the priority for all routes from a particular route origin.
Syntax Description
rip
bootp
icmp
static
ospf-intra
ospf-inter
ospf-as-external
ospf-extern1
ospf-extern2
priority
Default
Table 21 lists the relative priorities assigned to routes depending upon the learned source of the route.
Table 21: Relative Route Priorities
Route Origin
Direct
Blackhole
Static
ICMP
OSPFIntra
OSPFInter
RIP
OSPF External 1
OSPF External 2
BOOTP
Usage Guidelines
Although these priorities can be changed, do not attempt any manipulation unless you are expertly
familiar with the possible consequences.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies RIP.
Specifies BOOTP.
Specifies ICMP.
Specifies static routes.
Specifies OSPFIntra routing.
Specifies OSPFInter routing.
Specifies OSPF as External routing.
Specifies OSPF External 1 routing.
Specifies OSPF External 2 routing.
Specifies a priority number.
Priority
10
50
1100
1200
2200
2300
2400
3200
3300
5000
configure iproute priority
1171