Disable Rip Aggregation - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

IGP Commands

disable rip aggregation

Disables the RIP aggregation of subnet information on a RIP version 2 (RIPv2) router.

Syntax Description

This command has no arguments or variables.

RIP aggregation is disabled by default.

Usage Guidelines

The disable RIP aggregation command disables the RIP aggregation of subnet information on a switch

configured to send RIPv2-compatible traffic. The switch summarizes subnet routes to the nearest class

network route. The following rules apply when using RIP aggregation:

• Within a class boundary, no routes are aggregated.

• If aggregation is disabled, subnet routes are never aggregated, even when crossing a class boundary.

The following command disables RIP aggregation on the interface:

disable rip aggregation

This command was available in ExtremeWare 2.0.

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0