Enable Isis Export - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

enable isis export

enable isis [level-2 | area <isis area identifier>] export [bgp | i-bgp |
e-bgp | direct | rip | static | vip | ospf | ospf-intra | ospf-inter |
ospf-extern1 | ospf-extern2] [cost <cost(0-4261412864)> type [internal |
external] | <route map>]
Description
Enables the redistribution of non-IS-IS routes from the kernel routing table into a IS-IS level 2
subdomain or level 1 area:
Syntax Description
level-2
isis area identifier
bgp
i-bgp
e-bgp
direct
rip
static
vip
ospf
ospf-intra
ospf-inter
ospf-extern1
ospf-extern2
cost
internal
external
route map
Default
The default setting is disabled.
Usage Guidelines
All the redistributed routes are associated with the same metric and metric type, if specified. If a route
map is specified, routes can be assigned different metric and metric types. Routes maps can also filter
out routes.
1350
Specifies a level 2 subdomain
Specifies an IS-IS level 1 area
Specifies BGP routes.
Specifies I-BGP routes.
Specifies E-BGP routes.
Specifies direct routes.
Specifies RIP routes.
Specifies static routes.
Specifies VIP routes.
Specifies OSPF routes.
Specifies Intra OSPF routes.
Specifies Inter OSPF routes.
Specifies Extern 1 OSPF routes.
Specifies Extern 2 OSPF routes.
Specifies a cost from 0 to 4,261,412,864.
Specifies an internal metric type.
Specifies an external metric type.
Specifies a route map name.
ExtremeWare Software 7.3.0 Command Reference Guide