Disable Elrp-Client - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

ESRP Commands

disable elrp-client

Disables the Extreme Loop Recovery Protocol (ELRP) client (standalone elrp) globally.

Syntax Description

This command has no arguments or variables.

Usage Guidelines

This command disables the ELRP globally so that none of the ELRP VLAN configurations take effect.

The ELRP client must be enabled globally in order for it to work on any VLANs. Use the

command to globally enable the ELRP client.

The following command globally disables the ELRP client:

disable elrp-client

This command was first available in ExtremeWare 7.3.0

Platform Availability

This command is available on all platforms.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0