Enable Icmp Redirects - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

enable icmp redirects

enable icmp redirects {vlan <vlan name>}
Description
Enables generation of ICMP redirect messages on one or all VLANs.
Syntax Description
vlan name Specifies a VLAN name.
Default
Enabled.
Usage Guidelines
This option only applies to the switch when the switch is not in routing mode.
Example
The following command enables the generation of ICMP redirect messages on all VLANs:
enable icmp redirects
History
This command was available in ExtremeWare 2.0.
This command was modified in an ExtremeWare IP Technology Services Release based on ExtremeWare
v6.1.8b12 to support MPLS modules.
Platform Availability
This command is available on all platforms.
1216 ExtremeWare Software 7.3.0 Command Reference Guide