Run Ipfdb-Check - Extreme Networks ExtremeWare Command Reference Manual

run ipfdb-check

run ipfdb-check [index <bucket> <entry> | <ip-address> {<ip-address>}]
{extended} {detail}
Description
Checks IP FDB entries for consistency.
Syntax Description
bucket
entry
ip-address
ip-address
extended
detail
Default
N/A.
Usage Guidelines
The IP FDB error checking function logs the error count into the system log. Use the
log more detailed debug information.
Example
The following command will do consistency checking on IP FDB entries for IP address 10.20.30.55:
run ipfdb-check 10.20.30.55
History
This command was first available in ExtremeWare 6.1.9
Platform Availability
This command is available on all platforms.
The
extended
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the bucket portion of the FDB hash index.
Specifies the entry portion of the FDB hash index.
Specifies an IP address. FDB entries with this IP address will be checked.
Specifies a second IP address, for checking bi-directional entries.
Enables OTP index checking in the MAC entry and VPST of the egress port.
Specifies that more detailed debug information should be logged.
option is available on the BlackDiamond switch only.
run ipfdb-check
option to
detail
1237