Create Udp-Profile - Extreme Networks ExtremeWare Command Reference Manual

IP Unicast Commands

create udp-profile

create udp-profile <profile_name>
Description
Creates a UDP-forwarding destination profile that describes the types of UDP packets (by port number)
that are used, and where they are to be forwarded.
Syntax Description
profile_name Specifies a UDP profile name.
Default
N/A.
Usage Guidelines
You must give the profile a unique name, in the same manner as a VLAN, protocol filter, or Spanning
Tree Domain (STD). A maximum of 10 UDP-forwarding profiles can be defined.
Example
The following command creates a UPD profile named backbone:
create udp-profile backbone
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
1184 ExtremeWare Software 7.3.0 Command Reference Guide