Configure Isis System-Identifier - Extreme Networks ExtremeWare Command Reference Manual

configure isis system-identifier

configure isis system-identifier <system identifier>
Description
Configures a 6 hex octet system identifier for IS-IS routing.
Syntax Description
system identifier
Default
By default, the system identifier is set to the switch's MAC address. This command overrides that
default.
Usage Guidelines
The system identifier can only be configured when IS-IS processing is disabled.
Example
The following command sets the system identifier:
configure isis system-identifier 0000.0000.001a
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies the 6 hex octet system identifier. The format is xxxx.xxxx.xxxx where
x represents a hexadecimal digit.
configure isis system-identifier
1275