Unconfigure Elrp-Client - Extreme Networks ExtremeWare Command Reference Manual

unconfigure elrp-client

unconfigure elrp-client
unconfigure elrp-client <vlan name>
Description
Disables a pending one-shot or periodic ELRP request for the specified VLAN.
Syntax Description
vlan name Specifies a VLAN name.
Default
None.
Usage Guidelines
This command disables a pending one-shot or periodic ELRP request for the specified VLAN.
Use the command to configure non-periodic, one-time
configure elrp-client one-shot
transmission of ELRP packets. Use the command to configure
configure elrp-client periodic
periodic transmission of ELRP packets.
The ELRP client must be enabled globally in order for it to work on any VLANs. Use the
enable
command to globally enable the ELRP client.
elrp-client
The ELRP client can be disabled globally so that none of the ELRP VLAN configurations take effect. Use
the command to globally disable the ELRP client.
disable elrp-client
Example
The following command disables a pending ELRP request on VLAN elrp1:
unconfigure elrp-client elrp1
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 1125