Create Bgp Neighbor Remote-As-Number - Extreme Networks ExtremeWare Command Reference Manual

create bgp neighbor remote-AS-number

create bgp neighbor <ip address> remote-AS-number <number> {multi-hop}
Description
Creates a new BGP peer.
Syntax Description
ip address
number
multi-hop
Default
N/A.
Usage Guidelines
If the AS number is the same as the AS number provided in the
the peer is consider an IBGP peer, otherwise the neighbor is an EBGP peer. The BGP session to a newly
created peer is not started until the
Example
The following command creates a new BGP peer:
create bgp neighbor 192.168.1.17 remote-AS-number 65001
History
This command was available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies an IP address.
Specifies a remote AS number.
Specifies to allow connections to EBGP peers that are not directly connected.
enable bgp neighbor
create bgp neighbor remote-AS-number
configure bgp as
command is issued.
command, then
1447