Unconfiguring An Eaps Ring Port; Displaying Eaps Status Information - Extreme Networks ExtremeWare XOS Guide Manual

Concepts guide
Hide thumbs Also See for ExtremeWare XOS Guide:
Table of Contents

Advertisement

To disable the EAPS function for the entire switch, use the following command:
disable eaps

Unconfiguring an EAPS Ring Port

Unconfiguring an EAPS port sets its internal configuration state to INVALID, which causes the port to
appear in the Idle state with a port status of Unknown when you use the
command to display the status information about the port.
{detail}
To unconfigure an EAPS primary or secondary ring port for an EAPS domain, use the following
command:
unconfigure eaps <name> [primary | secondary] port
The following command example unconfigures this node's EAPS primary ring port on the domain
"eaps_1":
unconfigure eaps eaps_1 primary port

Displaying EAPS Status Information

To display EAPS status information, use the following command:
show eaps
This example displays summary EAPS information:
EAPS Enabled: Yes
EAPS Fast-Convergence: Off
Number of EAPS instances: 2
# EAPS domain configuration :
--------------------------------------------------------------------------------
Domain
State
--------------------------------------------------------------------------------
d1
Complete
d2
Links-Up
--------------------------------------------------------------------------------
The following display shows sample output for the command
Name: d1
State: Complete
Enabled: Yes
Mode: Master
Primary port:
3:8
Secondary port: 3:16
Hello timer interval: 1
Fail timer interval:
Fail Timer expiry action: Send alert
Last update: From Master Id 00:01:30:f9:9c:b0, at Wed Jun
EAPS Domain has following Controller Vlan:
Vlan Name
c1
EAPS Domain has following Protected Vlan(s):
Vlan Name
ExtremeWare XOS 11.1 Concepts Guide
Mo
En
Pri
M
Y
3:8
T
Y
3:8
Port status: Up Tag status: Tagged
Port status: Blocked
sec
3
sec
VID
1000
VID
Configuring EAPS on a Switch
show eaps {<eapsDomain>}
Sec
Control-Vlan VID
3:16
c1
(1000) 100
3:16
c2
(1001) 100
show eaps <eapsDomain>
Running: Yes
Tag status: Tagged
9 09:09:35 2004
Count
:
279

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeware xos 11.1

Table of Contents