Setting Zero Reset; Setting The Offset Value - Omron ZG2 Series User Manual

Setting Zero Reset

Setting the Offset Value

To set a reference value for zero reset to a value other than 0 (zero), set the offset amount
using this function. After setting any target value, execute a zero reset in the RUN mode.
Executing Reference Zero Reset p.115
 ADJ mode-MENU/VIEW key-[OUT]-[ZERO]
Setting value
ZERO
Note
To change numerical values, use the ↑ key/↓ key, and to change the number of digits use the
← key/→ key.
114
Setting Zero Reset
Description
Sets the offset amount.
Range: -999.99999 to +999.99999 (default value: 0)
ZG2 User's Manual