Note
: Reset of your phone may take a few minutes. Do not power off until the phone starts up successfully.
Resetting the IP phone to Custom Factory Settings
After you enable the custom factory feature, you can import the custom factory configuration file, and then reset the
IP phone to custom factory settings.
Procedure
1. From the web user interface, click Settings > Configuration.
2. In the Import Factory Config block, click Browse to locate the custom factory configuration file from your local
system.
3. Click Import.
4. After the custom factory configuration file is imported successfully, you can reset the IP phone to custom factory
settings.
Topic
Custom Factory Configuration
Custom Factory Configuration
The following table lists the parameters you can use to configure a custom factory.
Parameter static.features.custom_factory_config.enable
Description It enables or disables the Custom Factory Configuration feature.
0-Disabled
Permitted
1-Enabled, Import Factory Configuration item will be displayed on the IP phone's web user interface at
Values
the path Settings > Configuration. You can import a custom factory configuration file or delete the
user-defined factory configuration via the web user interface.
Default
0
Parameter static.custom_factory_configuration.url
It configures the access URL of the custom factory configuration files.
Description
Note: It works only if "static.features.custom_factory_config.enable" is set to 1 (Enabled) and the file
format of the custom factory configuration file must be *.bin.
Permitted
URL within 511 characters
Values
Default
Blank
T57W/T54W/T53W/T53/T53C/T48U/T46U/T43U/T42U/CP925/CP935W:
Settings > Configuration > Import Factory Configuration
Web UI
Other Phones:
Settings > Configuration > Import Factory Config
Deleting the Custom Factory Settings Files
You can delete the user-defined factory configurations via the web user interface.
Procedure
1. From the web user interface, click Settings > Configuration.
2. Click Del/Delete in the Import Factory Config (Import Factory Configuration) field.
The web user interface prompts you whether to delete the user-defined factory configuration.
Troubleshooting Methods
<y0000000000xx>.cfg
<y0000000000xx>.cfg
609