Reboot In Talking; Reboot In Talking Configuration; Reserve # In User Name - Yealink SIP-T3 Administrator's Manual

Note: It works only if "account.X.session_timer.enable" is set to 1 (Enabled).
Permitted
Integer from 90 to 7200
Values
Default 1800
Web UI Account > Advanced > Session Expires (90~7200s)
Parameter account.X.session_timer.refresher
It configures who refreshes the SIP session during a call.
Description
Note: It works only if "account.X.session_timer.enable" is set to 1 (Enabled).
0-UAC
Permitted
Values
1-UAS
Default 0
Web UI Account > Advanced > Session Refresher
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Reboot in Talking

Reboot in talking feature allows the phones to reboot during an active call when it receives a reboot Notify mes-
sage.
Topic

Reboot in Talking Configuration

Reboot in Talking Configuration
The following table lists the parameter you can use to configure the reboot in talking.
Parameter features.reboot_in_talk_enable
Description It enables or disables the phone to reboot during a call when it receives a reboot Notify message.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Web UI Features > General Information > Reboot in Talking

Reserve # in User Name

Reserve # in User Name feature allows the phones to reserve "#" in user name. When Reserve # in User Name fea-
ture is disabled, "#" will be converted into "%23". For example, the user registers an account (user name: 1010#) on
the phone, the phone will send 1010%23 instead of 1010# in the REGISTER message or INVITE message to the
SIP server.
Example of a SIP REGISTER message:
INVITE sip:2@10.2.1.48:5060 SIP/2.0
Via: SIP/2.0/UDP 10.3.20.6:5060;branch=z9hG4bK1867789050
[1]
<MAC>.cfg
<y0000000000xx>.cfg
General Features
554