Mymelodyringn.wav) - Yealink SIP-T3 Administrator's Manual

Note: If the user is waiting for a call, "Bellcore-dr5" is a splash ring tone reminding the user that the DND or Always
Call Forward feature is enabled on the server side.
Alert-Info: ringtone-N/Alert-Info: ringtone-RingN.wav (or Alert-Info:
MyMelodyN/Alert-Info: MyMelodyRingN.wav)
When the Alter-Info header contains the keyword "ringtone-N/ringtone-RingN" or "MyMolodyN/MyMelodyRingN",
the phone will play the corresponding local ring tone (RingN.wav), or play the first local ring tone (Ring1.wav) for
about 10 seconds if "N" is greater than 10 or less than 1.
Examples:
Alert-Info: ringtone-2
Alert-Info: ringtone-Ring2.wav
Alert-Info: ringtone-2;x-line-id=1
Alert-Info: <http://10.1.0.31>;info=ringtone-2
Alert-Info: <http://127.0.0.1/ringtone-2>
Alert-Info: MyMelody2
Alert-Info: MyMelodyRing2.wav
Alert-Info: MyMelody2;x-line-id=1
Alert-Info: <http://10.1.0.31>;x-line-id=0;info=MyMelody2
The following table identifies the corresponding local ring tones:
Value of N
1
Ring1.wav
2
Ring2.wav
3
Ring3.wav
4
Ring4.wav
5
Ring5.wav
6
Ring6.wav
7
Ring7.wav
8
Ring8.wav
9
Ring9.wav
10
Ring10.wav
11
Ring Tone
Ring1.wav
Ring2.wav
Ring3.wav
Ring4.wav
Ring5.wav
Ring6.wav
Ring7.wav
Ring8.wav
Ring9.wav
Ring10.wav
Ring11.wav
Audio Features
178