Pnp Provision Configuration; Dhcp Provision Configuration - Yealink SIP-T3 Administrator's Manual

PnP Provision Configuration

The following table lists the parameter you can use to configure PnP provision.
Parameter static.auto_provision.pnp_enable
Description It triggers the Plug and Play (PnP) feature to on or off.
0-Off
Permitted
1-On, the phone broadcasts SIP SUBSCRIBE messages to obtain a provisioning server URL where
Values
the phone can request the configuration from during startup.
Default
1
Web UI
Settings > Auto Provision > PNP Active
Parameter static.auto_provision.pnp_check_url.enable
It enables or disables the phone to match the received provisioning URL with the last one from where
Description
the phone successfully requests the configuration via a PnP provision.
0-Disabled
Permitted
Values
1-Enabled, the phone performs a PnP provision again only when the provisioning URLs are matched.
Default 0
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices

DHCP Provision Configuration

You can select to use IPv4 or IPv6 custom DHCP option according to your network environment. The IPv4 or IPv6
custom DHCP option must be in accordance with the one defined in the DHCP server.
The following table lists the parameters you can use to configure the DHCP provision.
Parameter static.auto_provision.dhcp_option.enable
Description It triggers the DHCP Active feature to on or off.
0-Off
Permitted
Values
1-On, the phone obtains the provisioning server address by detecting DHCP options.
Default
1
Web UI
Settings > Auto Provision > DHCP Active
Color Screen Phones:
Menu > Advanced (default password: admin) > Auto Provision > DHCP Active
CP925/CP935W:
Phone UI
More > Advanced (default password: admin) > Auto Provision > DHCP Active
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Auto Provision > DHCP Active
Parameter static.auto_provision.dhcp_option.list_user_options
It configures the IPv4 custom DHCP option for requesting provisioning server address.
Multiple options are separated by commas.
Description
Note: It works only if "static.auto_provision.dhcp_option.enable" is set to 1 (On).
Permitted
Integer from 128 to 254
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Provisioning
99