Live Dialpad; Live Dialpad Configuration; Auto Redial; Auto Redial Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones

Live Dialpad

Live Dialpad allows the phones to automatically dial out the entered phone number without pressing the send key
after a designated period of time.
Topic

Live Dialpad Configuration

Live Dialpad Configuration
The following table lists the parameters you can use to configure live dialpad.
Parameter phone_setting.predial_autodial
It enables or disables the phone to automatically dial out the entered phone number on the pre-dial-
ing screen without pressing a send key.
Description
To enter the pre-dialing screen, directly enter numbers when the phone is idle.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Web UI
Settings > Preference > Live Dialpad
Parameter phone_setting.inter_digit_time
It configures the delay time (in seconds) for the phone to automatically dial out the entered phone
number without pressing a send key.
Description
For the pre-dialing screen, it works only if "phone_setting.predial_autodial" is set to 1 (Enabled).
Permitted
Integer from 1 to 14
Values
Default 4
Web UI Settings > Preference > Inter Digit Time (1~14s)

Auto Redial

You can set the phone automatically redial the last dialed number when the callee is temporarily unavailable. Both
the number of attempts and waiting time between redials are configurable.
Topic

Auto Redial Configuration

Auto Redial Configuration
The following table lists the parameters you can use to configure auto redial.
Parameter auto_redial.enable
It enables or disables the phone to automatically redial the last dialed number when the callee is tem-
Description
porarily unavailable.
Permitted
0-Disabled
Values 1-Enabled
Default 0
Web UI
Features > General Information > Auto Redial
Phone UI Color Screen Phones:
416
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg