Handset/Headset/Speakerphone Mode; Handset/Headset/Speakerphone Mode Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Bluetooth > Bluetooth (On) > Edit My Device Information > Device Name
Black-and-white Screen Phones:
Menu > Settings > Basic Settings > Bluetooth > Bluetooth (On) > Edit My Device Information > Device
Name
Parameter bluetooth.connect_confirm.enable
It enables or disables the phone to prompt users to confirm the connection request from the Bluetooth
Description
device.
0-Disabled
Permitted
Values
1-Enabled, the prompt will not appear during the call.
Default 0
Supported
CP920, CP925, CP935W
Devices
Parameter bluetooth.a2dp_sink
Description It enables or disables the phone to act as the connected Bluetooth-enabled mobile phone player.
0-Disabled, the Media audio item is hidden on the connected Bluetooth-enabled mobile phone.
Permitted
2-Enabled, the phone automatically acts as the Bluetooth-enabled mobile phone player after you pair
Values
and connect the Bluetooth-enabled mobile phone to the phone successfully.
Default
1
Supported
CP920, CP925, CP935W
Devices
Parameter bluetooth.high_encryption.enable
Description It enables or disables the minimum password strength limit.
0-Disabled
Permitted
1-Enabled, when the Bluetooth device is paired with the phone, the minimum password strength can-
Values
not be lower than 56bits.
Default 1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920,
Devices CP925, CP935W
Web UI Features > Bluetooth > High Security Pairing
[1]
If you change this parameter, the phone will reboot to make the change take effect.

Handset/Headset/Speakerphone Mode

Yealink phones support three ways to place/answer a call: using the handset, using the headset or using the speak-
erphone. You can disable the infrequently used audio device as required.
Topic

Handset/Headset/Speakerphone Mode Configuration

Handset/Headset/Speakerphone Mode Configuration
The following table lists the parameters you can use to configure handset/headset/speakerphone mode.
Parameter features.speaker_mode.enable
284
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg