Yealink SIP-T3 Administrator's Manual page 320

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
String
Values
Default Blank
Parameter softkey.X.softkey_id
It configures the softkey id for custom soft key X.
Example:
Description
softkey.1.softkey_id = custom_macro1
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
String
Values
Default
Blank
Parameter softkey.X.use.idle
It enables or disables the custom soft key X to be displayed in the idle state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter softkey.X.use.incoming_call
It enables or disables the custom soft key X to be displayed in the alerting (ringing) state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter softkey.X.use.connecting
It enables or disables the custom soft key X to be displayed in the connecting state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter softkey.X.use.transfer_connecting
It enables or disables the custom soft key X to be displayed in the transfer connecting state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
Values 1-Enabled
314
[1]
[1]
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg